Question: What Is M10 Bolt In Inches?

What is the most common bolt size?

Re: Most common metric bolt sizes The Asian manufacturers used the 12mm and 10mm as the most common, followed by the 15, 17 and 19mm..

Is m8 the same as 8mm?

All dimensions of the bolt (and nut) are a parameter of its basic diameter. The “M8” refers to an approximation of the major diameter of the thread of 8mm – actually slightly less, like 7.9, as the sharp edges are rounded off.

Are m10 and 3/8 the same?

For example, a 3/8-16 (coarse) thread has a 3/8″ nominal major diameter and 16 threads per inch, while a 3/8-24 (fine) thread has the same nominal major diameter and 24 threads per inch. … For example, the thread “M10” automatically means a coarse pitch, while any added pitch callout, such as M10x1.

What is an m6 bolt in inches?

You can identify an M6 screw by measuring the diameter with a ruler. It’ll be 6 mm, or slightly more than 7/32 inches (0.228″).

How do I know what m10 bolt I have?

The “M” designates the bolt is Metric and the number after the M indicates the size. The number after that is the length. The number after that is the thread pitch. eg: M10 x 40 x 1.25.

Is an m6 bolt 6mm?

M6 refers to a metric 6mm screw. The outside diameter of the threads is 6mm. … M6 screws are commonly used by HP. You can identify an M6 screw by measuring the diameter with a ruler at slightly more than 7/32″ (0.228″).

Is m10 same as 10mm?

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”)….Table 3.MetricClosest InchM8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)M12-1.751/2-13 (Larger)M14-2.09/16-12 (Larger)16 more rows

What does m8 1.25 mean?

For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.

What does m10x1 25 mean?

For example, an M10x1. 5 (coarse) thread has a 1.5mm pitch, while an M10x1. 25 (fine) thread has a 1.25mm pitch. … For example, the thread “M10” automatically means a coarse pitch, while any added pitch callout, such as M10x1. 25, specifies a non-coarse pitch.

What size is a m10 bolt?

31496″) The M10, about 10 mm in diameter, (. 3937″) and the M12 about 12 mm in diameter, (. 4724″). The “M” designates the bolt is Metric and the number after the M indicates the size.

How do bolt sizes work?

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”). For nuts, size will appear as diameter and pitch. … In the example above, a pitch of 1.0 means that from one thread to the next thread, the distance is 1.0 millimeter.

Is Grade 8 or 10.9 stronger?

Class 10.9 is stronger than class 8.8. It is commonly found in high strength automotive applications. Class 10.9 is similar to grade 8. A low carbon steel for general use.

What does m10 mean on a bolt?

6. Those are metric screw dimensions. M10 means a 10 millimeter outer diameter for the bolt or whatever piece it is; M12 means 12 millimeters. The part after the ‘x’ is the pitch — how many mm a thread is wide. To figure out which you have, you can measure the existing part with calipers and a thread gauge.

What are standard bolt sizes?

Typically, machine bolt sizes range from 1/4″ to 1 1/4″ for square heads and 3/8″ to 1 3/4″ in diameter for hex heads, and lengths span from about 3/4″ to 18″ for square and 6 1/2″ to 24″ for hex heads. Measure length from under the head to the threaded end of the bolt.

What is M in bolt size?

The “M” designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

How do you determine bolt size?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

Is m6 or m8 bigger?

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”)….Table 3.MetricClosest InchM6-1.01/4-28 (Larger)M7-1.01/4-28 (Smaller)M8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)16 more rows