# Quick Answer: What Is The 24 Subnet?

## How many IP addresses are in use?

4.3 billionIn fact, there are today about 4.3 billion IPv4-type IP addresses throughout the entire world..

## How many IP addresses are in a 24?

CIDR, Subnet Masks, and Usable IP Addresses Quick Reference Guide (Cheat Sheet)CIDRSubnet MaskTotal IPs/27255.255.255.22432/26255.255.255.19264/25255.255.255.128128/24255.255.255.025629 more rows•Aug 26, 2011

## What does it mean 192.168 0.0 24?

1. 192.168.0.0 Refers to the IP adress /24 refers to the subnet. / 24 subnet is 255.255.255.0. 192.168.0.0/24 is common for home networks.

## What exactly is a subnet?

A subnet or subnetwork is a smaller network inside a large network. Subnetting makes network routing much more efficient.

## How do you subnet?

255.248 or /29.STEP 1: Convert to Binary.STEP 2: Calculate the Subnet Address. To calculate the IP Address Subnet you need to perform a bit-wise AND operation (1+1=1, 1+0 or 0+1 =0, 0+0=0) on the host IP address and subnet mask. … STEP 3: Find Host Range. … STEP 4: Calculate the Total Number of Subnets and Hosts Per Subnet.

## What does 8 mean in IP address?

A network numbered “10.0. 0.0/8” (which is one of those reserved for private use) is a network with eight bits of network prefix, denoted by “/8” after the oblique. The “8” denotes that there are 24 bits left over in the network to contain IPv4 host addresses: 16,777,216 addresses to be exact.

## What does 24 mean in IP address?

The number after the slash represents the number of consecutive 1’s in the subnet mask. For example, 192.168.10.0/24 is equal to the network 192.168.10.0 with a 255.255.255.0 subnet mask. If you convert 255.255.255.0 to binary, you end up with 24 consecutive 1 ‘s: 11111111.11111111.11111111.00000000.

## What is the proper subnet mask for an IP address of 192.168 1.1 24?

1.1/24 which means it takes 24 bits to determine the network address, thus having the netmask 255.255. 255.0. And in the example below that where we used 1 more bit that notation is 192.168. 1.1/23 with a subnet mask of 255.255.

## What is a Class C subnet?

A class C network would have a subnet mask of 255.255. 255.0 which means that 24 bits are used for the network. In CIDR notation this is designated by a /24 following the IP address. So: IP address 192.168.

## What does 28 mean in IP address?

It’s a subnet mask. IP address has 4 octets of 8 bits each and 32 bits in total. 28 means, first 28 bits denote network ID while 4 bits are used for hosts or they identify the hosts.

## How many subnets are in a 24?

Converting /29 gives 255.255. 255.248. This shows that the fourth octet is the interesting octet. Deducting 248 from 256 gives us 8 so the subnets are 0, 8, 16, 24, 32, 40, 48……2-3 Subnetting.Dotted Decimal ValueCIDR notation255.255.255.0/24255.255.255.128/25255.255.255.192/26255.255.255.224/2719 more rows•Dec 12, 2013

## What is a 255.255 255.0 subnet?

A subnet mask of 255.255. 255.0 allows for close to 256 unique hosts within the network (since not all 256 IP addresses can be used). … This is the default subnet mask used by Class B networks and provides up to 65,536 IP addresses (256 x 256). The largest Class A networks use a subnet mask of 255.0.

## How many 24 subnets are in a 16?

Since you have 8 more bits to use to define the network in the /24 subnets under the /16, there are 256 /24 subnets in a specific /16.

## What destination adress is 255.255 255.255 for?

255.255. 255.255: This address is reserved for network broadcasts, or messages that should go to all computers on the network. 127.0. 0.1: This is called the loopback address, meaning your computer’s way of identifying itself, whether or not it has an assigned IP address.

## What is a Class A subnet?

A Class A IP address reserves 8 bits for a network with 24 bits dedicated to hosts. Its IP address spans from 0 to 126. The Class A subnet mask is 255.0. 0.0. Accordingly, Class A IP addresses are best used to serve incredibly large networks.

## How many 20 subnets are in a 16?

Network BitsSubnet MaskNumber of Subnets/17255.255.128.02 (0)/18255.255.192.04 (2)/19255.255.224.08 (6)/20255.255.240.016 (14)11 more rows•Aug 16, 2003

## What does 29 mean in IP address?

To explain what it actually is: /29 means that 29 of the 32 bits of the address are the netmask, therefore, only 3 bits are available for differentiating between computers. However, you always lose 2 addresses from the block for broadcast and loopback, so your result is: 2**(32-29) – 2 = 2**3 – 2 = 8 – 2 = 6.

## What is a 16 subnet?

The last three octets of a Class A subnet mask are used to address hosts on a LAN; the 24 bits you can manipulate however you wish. … It saves you from typing, or pronouncing, the whole mask. For example, /8 means 255.0. 0.0, /16 is 255.255. 0.0, and /24 is 255.255.